Engineering Floating Plates

HOW IT WORKS

Ceramic strike faces used in the RF2 threat plates are typically around three to four times denser than water. Buoyancy in HighCom plate designs come naturally from the protective foams added to the strike face for drop-protection, and to the wear face for improved comfort and to mitigate trauma behind the plate when shot. These lightweight foams are typically fifteen to twenty times lighter than water and the HighCom Armor total plate density is reduced. When coupled with HighCom’s lightweight ceramic strike faces, the plates are positively buoyant by design.

SUPERIOR RANGE
10×12 Shooters Cut
3.2 lbs.

Get additional Info

Enhanced Range
10×12 Shooters Cut
3.7 lbs.

SEE PLATES

IDEAL FOR ALL MARITIME OPERATIONS

MULTI-HIT CAPABLE FOR HIGH-THREAT ENVIRONMENTS

SAFE FOR WATER PATROL

COASTAL ENVIRONMENTS

Protection Level:

Protection Level:
RF2 Stand Alone
NIJ 0101.07

+ Material:
Ceramic with lightweight UHMWPE

+ Process:
XTclave™ ultra-high pressure consolidation

RF3 NEAR-FUTURE PRODUCTION

HighCom Armor builds 8 plate models across the RF1 and RF2 threat levels that are neutrally or positively buoyant. Whether operating in freshwater rivers or coastal environments, HighCom Armor plates are designed to provide protection without compromising the mission or safety.

HighCom Armor is currently in development and independant laboratory, dunk tank testing for RF3 Positive Buoyant Plates. Production capabilities estimated by Fall, 2026.

Manufactured in Columbus, Ohio

PROUDLY MADE IN THE UNITED STATES OF AMERICA

HighCom Armor supports Law Enforcement, Fire and Rescue, and Security contracts with hundreds of federal, state, and local agencies throughout the United States. We are capable of high-capacity output of more than 20,000+ pieces of armor per month.
We have provided DOD contracts and distribution of close to 1,000,000+ pieces of ballistic armor over the past decade. YES, We can support your needs!

FIND OUT MORE ON PLATES THAT FLOAT

For a Quote, additional information, or to conduct a live demonstration, Fill this form and we will get back to you immediately.
Name*
First Last
Email Address*
Company*
Pick a category*
Phone*
Your Message*
Untitled*
- I agree to all terms & conditions.

Terms & Conditions

Product Terms & Conditions (THE AGREEMENT)

WITH THE PURCHASE OF ANY BODY ARMOR OR BALLISTIC PROTECTIVE PRODUCT (the “Products”), BUYER’S ACKNOWLEDGES THAT IT IS UNDERSTOOD THAT THE PRODUCTS ARE NOT “BULLETPROOF”, NOR “BULLET-RESISTANT” EVEN IF PROPERLY MAINTAINED. ANY CLAIM OF COMPLIANCE WITH ANY STANDARD OR SPECIFICATION (INCLUDING NIJ STANDARDS) DOES NOT MEAN AND HIGHCOM ARMOR DIRECT LLC (“HIGHCOM ARMOR DIRECT”) AND ITS AFFILIATES DOES NOT SO WARRANT THAT THE PRODUCT WILL PREVENT BULLET PENETRATION,OR PROTECT AGAINST BALLISTIC THREATS, RIFLE FIRE, OR OTHER SHARP EDGED OR POINTED OBJECTS OR THAT THE IMPACT WILL NOT CAUSE INJURIES EVEN IF THE BULLET OR OTHER BALLISTIC THREAT IS STOPPED. IN ADDITION, THERE MAY BE ADDITIONAL “BEHIND ARMOR BLUNT TRAUMA (BABT) OR BEHIND HELMET BLUNT TRAUMA (BHBT) CAUSING A RISK FOR INJURY OR POTENTIALLY DEATH NOTWITHSTANDING USE OF ANY PRODUCTS. THESE INJURIES CAN RANGE FROM SEVERE BRUISES, BROKEN BONES, AND POSSIBLY INTERNAL INJURIES AND DEATH OR DISABILITY. IF STRUCK BY A BULLET EVEN WHILE USING BALLISTIC PROTECTIVE PRODUCTS, BUYER SHOULD SEEK IMMEDIATE MEDICAL ATTENTION TO ENSURE THERE ARE NO FURTHER INJURIES RESULTING FROM AN IMPACT. FAILURE TO FOLLOW STORAGE, USE, FITMENT, AND USE INSTRUCTIONS MAY IMPACT ON THE EFFICACY AND INTENDED PROTECTION OF OUR PRODUCTS AND THAT BUYER ASSUMES ALL RISK OF USE OF THE PRODUCTS. THE PARTIES AGREE THAT THE PURCHASE OF THE PRODUCTS IS SOLELY FROM HIGHCOM ARMOR DIRECT AND NO OTHER AFFILIATE THEREOF.

ALL SALES ARE FINAL.

With any purchase you confirm and attest the following:
- You are of legal age to own the item purchased.
- You do not have a criminal background.
- You are legally allowed to purchase the specified item in your state.
- You are not violating any state or federal laws with your purchase.
- You are not legally prohibited from purchasing the items chosen.
- You are not involved in criminal activities or groups.
- You are not legally banned from owning firearms or body armor.
- This purchase is for Buyer personally. The Product may not be transferred, loaned or otherwise shared with another individual. Furthermore, the Buyer agrees that the Products will only be utilized in the state, municipality, or county where the Product was shipped by HighCom Armor Direct. The original Buyer is responsible to report loss, theft, or transfer, to HighCom Armor Direct customer service and his/her local law enforcement.
- No individual sales made from this website can be exported from the United States (see Section 11 below).
- It is agreed that if for any reason law enforcement needs information regarding one of our purchasing parties HighCom Armor Direct will share this information.
THE PRODUCTS ARE PROVIDED “AS IS” AND “WITH ALL FAULTS. (A) NEITHER HIGHCOM ARMOR DIRECT NOR ANY PERSON ON HIGHCOM ARMOR DIRECT’S BEHALF HAS MADE OR MAKES ANY EXPRESS OR IMPLIED REPRESENTATION OR WARRANTY WHATSOEVER, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF: (i) MERCHANTABILITY; (ii) FITNESS FOR A PARTICULAR PURPOSE; (iii) TITLE; OR (v) PERFORMANCE OF PRODUCTS TO STANDARDS SPECIFIC TO THE COUNTRY OF IMPORT, WHETHER ARISING BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED, AND (B) BUYER ACKNOWLEDGES THAT IT HAS NOT RELIED ON ANY REPRESENTATION OR WARRANTY MADE BY HIGHCOM ARMOR DIRECT, OR ANY OTHER PERSON ON HIGHCOM ARMOR DIRECT’S BEHALF. To the extent permitted under the California Song-Beverly Consumer Warranty Act, this product is sold “AS IS” and “WITH ALL FAULTS”. The entire risk as to the quality and performance of the product is with the Buyer. HighCom Armor Direct does not warrant that product descriptions or other content of this site is accurate, complete, reliable, current or error-free. HighCom Armor Direct are not an insurer, and bear no liability for any use, misuse, or failure to perform. By purchasing HighCom Armor Direct Products, Buyer, on its own behalf and on behalf of its successors and heirs assumes ALL risks of use or misuse, and agree not to hold HighCom Armor Direct, its dealers, distributors, supplier or other “partners” liable in any way and release HighCom Armor Direct its dealers, distributors, supplier or other “partners” from claims for any damages, injuries, or fatalities resulting from the use, misuse, or wrongful use of HighCom Armor Direct products. Buyer assumes all risk and liability resulting from use of the products, services, or information delivered hereunder, whether used singly or in combination with other products, services, or information. WHILE THE NATIONAL INSTITUTE OF JUSTICE (NIJ) STANDARDS ARE PUBLISHED TO ASSIST UNDERSTANDING THAT A PRODUCT IS DESIGNED TO STOP A BULLET OR OTHER PROJECTILE PER A SPECIFIED LEVEL OF PROTECTION (FOR REFERENCE ONLY PLEASE SEE: https://cjttec.org/equipment-standards/ THERE IS NO WARRANTY OR GUARANTEE THAT THE PRODUCTS WILL SO PERFORM OR STOP A BULLET OR OTHER PROJECTILE PER SUCH SPECIFIED LEVEL OF PROTECTION. Products shall not be returned to HighCom Armor Direct without HighCom Armor Direct’s prior written permission at their sole discretion. No charge or expense incident to any claims will be allowed unless approved by an authorized representative of HighCom Armor Direct. If consent is provided by HighCom Armor Direct, the return policy is listed at Temp Link: HighCom Armor Direct Return Policy for Consumers.pdf

Contact for HighCom Support: 614-500-3065

3. The Products are provided Ex Works HighCom Armor Direct Warehouse (Incoterms 2020). The Buyer shall reimburse the HighCom Armor Direct for all sales, use, value added and similar taxes (but excluding for avoidance of doubt HighCom Armor Direct income taxes) excises or other charges which the HighCom Armor Direct may be required to pay to any government or governmental authority (national, state. provincial or local) upon the sale, production or transportation of the products, services, or information sold hereunder. In the event Buyer fails to fulfill HighCom Armor Direct’s terms of payment, or in case HighCom Armor Direct shall have any doubt any time as to Buyer’s financial responsibility, HighCom Armor Direct may decline to make further deliveries except upon receipt of cash or satisfactory security. HighCom Armor Direct intends to ship all Products within an estimated 3-5 business days and larger orders, out of stock items, and custom-built products may take 30-90+ days depending on the specifics of order.

Once the order is placed online Buyer will receive an order confirmation with the status of the order. Once the order is shipped, Buyer will receive an email notification with a tracking number.
Damage to product in shipment – refer to the carrier Terms of Service
Lost or undelivered products – refer to the carrier Terms of Service
Due to the nature of HighCom Protective Products, deliveries cannot be made to a “Post Office Box (P.O. Box), Fleet Post Office (FPO), or Army Post Office (APO).

4. No Cancellations. Orders are not cancellable and sales by the Buyer are not returnable. HighCom reserves the right to cancel any sale or order at its sole discretion including as a result of limitations of inventory, materials, supplies, shipping issues and determinations by HighCom Armor Direct that Buyer is not eligible to purchase applicable Products.

5. Indemnification – Buyer (on own behalf and on behalf of successors or heirs) will indemnify, defend, and hold HighCom Armor Direct and its officers, directors, shareholders, members, employees, and affiliates harmless from and against any and all losses, costs, damages, liabilities, or expenses (including reasonable attorneys’ fees) arising or resulting from any claims of Buyer complied in all respects with all Laws; and use of the Products after misuse, or other non-compliance with Product care guides.

https://highcomarmor.box.com/s/uan8jwcf9zblgb2w66uylnt0fr6q982q

6. Limitation of Damages. IN NO EVENT WILL HIGHCOM ARMOR DIRECT’S AND ITS AFFILIATES AGGREGATE LIABILITY TO BUYER (AND ITS SUCCESSORS AND HEIRS) FOR ANY AND ALL DAMAGES ARISING FROM ANY AND ALL CLAIMS RELATED TO THE BREACH OF THIS AGREEMENT, USE, DEFECT IN, NONDELIVERY, OR THE PROVISION OF ANY PRODUCT, SERVICE, OR INFORMATION COVERED BY THIS AGREEMENT, REGARDLESS OF WHETHER THE FORM OF ACTION IS BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, STATUTE, OR OTHERWISE, EXCEED THE TOTAL PRICE PAID BY BUYER TO HIGHCOM ARMOR DIRECT FOR THE PRODUCTS, SERVICES, OR INFORMATION IN RESPECT OF WHICH DAMAGES ARE CLAIMED. NO CLAIM SHALL BE ALLOWED FOR PRODUCT THAT HAS BEEN MODIFIED OR MISUSED IN ANY MANNER. FAILURE TO GIVE NOTICE OF A CLAIM WITHIN NINETY (90) DAYS FROM DATE OF DELIVERY, OR THE DATE FIXED FOR DELIVERY (IN CASE OF NONDELIVERY) SHALL CONSTITUTE A WAIVER BY BUYER OF ALL CLAIMS IN RESPECT OF SUCH PRODUCTS.

7. Consequential Damage Disclaimer. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EACH PARTY HERETO WAIVES ANY CLAIM FOR INDIRECT, CONSEQUENTIAL, PUNITIVE, EXEMPLARY OR MULTIPLIED DAMAGES ARISING OUT OF OR RELATING TO THIS AGREEMENT OR THE PROVISION OF ANY PRODUCT, SERVICE, OR INFORMATION. TO THE EXTENT PERMITTED BY APPLICABLE LAW, THE PARTIES WAIVE AND AGREE NOT TO ASSERT NON-CONTRACTUAL CLAIMS ARISING UNDER STATE LAW RELATING TO THIS AGREEMENT OR THE PROVISION OF ANY PRODUCT, SERVICE, OR INFORMATION COVERED BY THIS AGREEMENT, AND THIS AGREEMENT SHALL BE DEEMED TO INCLUDE SUCH LANGUAGE AS MAY BE REQUIRED TO AFFECT SUCH WAIVER. WAIVER BY EITHER PARTY OF ANY DEFAULT BY THE OTHER HEREUNDER SHALL NOT BE DEEMED A WAIVER BY SUCH PARTY OF ANY DEFAULT BY THE OTHER WHICH MAY THEREAFTER OCCUR.

8. No liability shall result from delay in performance or nonperformance, directly or indirectly caused by circumstances beyond the control of the party affected, including, but not limited to, act of God, fire, explosion, flood, war, act of or authorized by any Government, accident, labor trouble or shortage, pandemic, inability to obtain material, equipment or transportation, failure to obtain or hardship in obtaining reasonably priced supplies of materials, or failure of usual transportation mode. Quantities so affected may be eliminated from the agreement without liability, but the agreement shall remain otherwise unaffected. HighCom Armor Direct shall have no obligation to purchase supplies of the product specified herein to enable it to perform this Agreement.

9. Restrictions on Product Testing and Evaluation (“T&E”) Requests. Buyer is strictly prohibited from sharing, distributing, or providing HighCom Armor Direct products for T&E purposes without obtaining prior written authorization from HighCom Armor Direct which consent may be withheld at the sole discretion of HighCom Armor Direct. T&E includes, but is not limited to, any product demonstrations, field testing, or evaluations conducted by third parties, organizations, or individuals. Unauthorized sharing of HighCom Armor Direct products for T&E purposes is a material breach of this Agreement. Testing conducted by individuals, departments, or other entities are not official and detract from the overall quality and compliance by the whole of the armor manufacturer community. Unofficial tests, whether positive or negative, reports, videos, and/or “posts” should not be regarded as a measure of value or validity. The misleading nature of these entities should be regarded as libelous and, in some cases, illegal. These actions may be pursued by law enforcement or susceptible to legal action.

10. Special Conditions.

Lawful Citizen: HighCom Armor Direct reserves the right to refuse any sale to any Buyer which order is suspected of be or is to be delivered to a convicted felon and suspected criminals or anyone HighCom Armor Direct determines in its sole discretion as a potential threat to law enforcement or their community.
Connecticut Residents: As a result of restrictions under Connecticut state law, HighCom Armor Direct will not offer for sale or delivery into the state of Connecticut body armor or related items. Please visit your local law enforcement supply store for support in this matter. This foregoing does not apply to law enforcement officers and agencies.
New York Residents: As a result of restrictions under New York state law, HighCom Armor Direct will not offer for sale or delivery into the state of New York body armor or related items. Please visit your local law enforcement supply store for support in this matter. This foregoing does not apply to law enforcement officers and agencies and certain government emergency response organizations.
HighCom Armor Direct maintains a database of serialized products that may be shared with law enforcement.

11. EXPORT ADMINISTRATION REGULATION (EAR) AND INTERNATIONAL TRAFFIC IN ARMS

REGULATIONS (ITAR)

Products purchased from HighCom Armor Direct may contain hardware/technical data within the definition of 15 CFR Chapter VII, Subchapter C – EXPORT ADMINISTRATION REGULATIONS Part 730 through 774, as well as 22 CFR Chapter I, Subchapter M – INTERNATIONAL TRAFFIC IN ARMS REGULATIONS part 120 through 130, and may be subject to the export control laws of the U.S.
The unauthorized reproduction, dissemination, or transfer of these products or technical data by any method to a foreign person, whether within the U.S. or abroad without the written authorization of the Department of Commerce Bureau of Industry & Security (BIS), Department of State Directorate of Defense Trade Controls (DDTC), or Department of Treasury Office of Foreign Assets Controls (OFAC) is strictly prohibited by law. (Please see 15 C.F.R., 22 C.F.R., 18 U.S.C., 22 U.S.C., and 50 U.S.C. for additional information)
Due to these laws and regulations, HighCom Armor Direct is required to only sell our products to lawful U.S. persons unless with an approved export license and therefore we use a simple method to verify proof of citizenship/residency before processing and delivering purchased protective products. By placing an order on our website, you agree to these requirements and that a request for your passport, birth certificate, and/or other form of identification may be required. If you refuse to provide this information your order will be canceled, and a refund will be provided.
To learn more about these regulations and laws please visit the agency websites below:

ITAR REGULATIONS (https://www.pmddtc.state.gov/ddtc_public/ddtc_public)
EXPORT ADMINISTRATION REGULATIONS (https://www.bis.gov/regulations/ear)
OFFICE OF FOREIGN ASSETS CONTROL (https://ofac.treasury.gov/)

The term “export,” as used in the ITAR, includes the obvious activities of sending or taking any ITAR-controlled commodity or information out of the United States. However, the term export also includes transferring EAR and ITAR-controlled commodities or information within the United States to anyone not a U.S. citizen or lawful permanent resident (with certain narrow exceptions). Given this definition, transfers of ITAR controlled commodities or information to non-U.S. employees of U.S. companies entirely within the U.S. are exports.
If the individual is not a U.S person, when applying the “deemed export” rules the EAR looks at the person’s most recent citizenship or permanent residence whereas the ITAR looks at the person’s country of origin (i.e., country of birth) and all current citizenships.
The most important phrase, from which most other ITAR definitions flow, is the phrase “defense article.” The ITAR defines “defense article” as any item or “technical data” identified on the USML, which is set forth in Part 121.1 of the ITAR. The definition of defense article additionally includes models, mockups, and other physical forms that reveal technical data directly relating to USML items.
BODY ARMOR classified on ITAR as category X personal protective equipment including NIJ level IV or higher performance body armor plates.
BODY ARMOR classified on EAR as category 1A005 and 1A613 as body armor, including NIJ level Type IIA, II, IIIA, or III.
BALLISTIC SHIELDS classified on EAR as category 0A979
§ 120.62 U.S. person: U.S. person means a person who is a lawful permanent resident as defined by 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). It also means any corporation, business association, partnership, society, trust, or any other entity, organization, or group that is incorporated to do business in the United States. It also includes any governmental (federal, state, or local) entity. It does not include any foreign person as defined in § 120.63 of this part.
If you have additional questions on this matter, please feel free to contact HighCom Armor Direct or feel free to contact the U.S. government agencies directly at any of the below phone or email addresses to inquire about the specific laws or regulations cited above.

ITAR DDTC

U.S. Department of State DDTC- Phone: (202) 663-1282
E-mail: [email protected]

EAR BIS

To speak with an export counselor, you may call one of the following numbers: (202) 482-4811 – Outreach and Educational Services Division (located in Washington, DC), (949) 660–0144 – Western Regional Office (located in Irvine, CA), (408) 998-8806 – Northern California branch (located in San Jose, CA), or e-mail your inquiry to the Export Counseling Division of the Office of Exporter Services at: [email protected]
OFAC DOT – Toll Free Hotline 1-800-540-6322, Local Hotline 1-202-622-2490, OFAC Licensing Division (Direct) 1-202-622-2480
BACKGROUND SCREENING: HighCom Armor Direct performs background screening on its customers and suppliers against required EAR/ITAR “lists”.

12. If for any reason (including but not limited to force majeure HighCom Armor Direct is unable to supply the total demand for products specified herein, HighCom Armor Direct may distribute its available supply among any or all purchasers, as well as departments and divisions of HighCom Armor Direct, or may distribute its available supply among one or a number of purchasers at its discretion or on such basis as it may deem fair and practical, without liability for any failure of performance which may result therefrom.

13. HighCom Armor Direct may furnish such technical assistance and information as it has available with respect to the use of the Products covered by this Agreement. Unless otherwise agreed in writing, all such information will be provided “AS IS” for information only without any warranty and does not modify the terms of this Agreement Buyer agrees to evaluate such information, to make an independent decision regarding the suitability of such information, products and services for Buyer’s application, and only use such products, services and information pursuant to the current good product stewardship principles and all regulatory requirements applicable to Buyer’s business.

14. Buyer acknowledges that it has received and is familiar with HighCom Armor Direct’s labeling and literature concerning the Products and its properties. Buyer agrees that Products sold hereunder will not knowingly be resold or given in sample form to persons using or proposing to use the products for purposes contrary to recommendations given by HighCom Armor Direct or prohibited by law but will be sold or given as samples only to persons who can handle, use and dispose of the products safely.

15. Term and Termination. HighCom Armor Direct may terminate this Agreement by providing written Notice to Buyer, (a) for any reason or no reason, which termination shall become effective no less than 30 days after delivery of the written Notice or (b) if Buyer breaches any provision of this Agreement, and either the breach cannot be cured or, if the breach can be cured, it is not cured by Buyer within 15 days after Sales Partner’s receipt of written Notice of such breach. All Sections of this Agreement except for Section survive termination of this Agreement.

16. Except as may be contained in a separate trademark license, the sale of Product (even if accompanied by documents using a trademark or trade name of HighCom Armor Direct) does not convey a license, express or implied, to use any trademark or trade name of HighCom Armor Direct, and Buyer shall not use any trademark or trade name of HighCom Armor Direct in the conduct of its business without HighCom Armor Direct’s prior written consent.

17. This Terms and Conditions is not assignable or transferable by Buyer, in whole or in part, except with the prior written consent of HighCom Armor Direct. HighCom Armor Direct reserves the right to sell, assign, or otherwise transfer its right to receive payment under this agreement.

18. Dispute Resolution and Arbitration – Buyer and HighCom Armor Direct agree to arbitrate all disputes, claims or controversies whether based on contract, tort, statute, or any other legal or equitable theory, arising out of or relating to (a) this Agreement or the relationship which results from this Agreement, (b) the breach, termination or validity of this Agreement, (c) the purchase or supply of any product, service, or information provided by HighCom Armor Direct, (d) events leading up to the formation of Buyer’s and HighCom Armor Direct’s relationship, and (e) any issue related to the creation of this Agreement or its scope, including the scope and validity of this paragraph. The parties shall before and as a condition to proceeding to arbitration attempt in good faith to resolve any such claim or controversy by mediation under the International Institute for Conflict Prevention & Resolution (“CPR”) Mediation Procedure then currently in effect. Unless the parties agree otherwise, the mediator will be selected from the CPR Panels of Distinguished Neutrals. Any such claim or controversy which remains unresolved 60 days after the appointment of a mediator or 60 days after good faith efforts by either party to proceed to mediation shall be finally resolved by binding arbitration in accordance with the CPR Rules for Non-Administered Arbitration then currently in effect by three independent and impartial arbitrators, none of whom shall be appointed by either party. This Agreement shall be governed by the Federal Arbitration Act, 9 U.S.C. §§ 1-16, to the exclusion of any state laws inconsistent therewith. Such arbitration shall be conducted in a city to be chosen by the arbitrators which is not the principal place of business of both parties, and the arbitrators and the parties shall conduct such arbitration in accordance with such procedures as may be necessary to permit use of the then current CPR Arbitration Appeal Procedure. Any judgment upon the award rendered by the arbitrator(s) may be entered by any court having jurisdiction thereof. In the event that either party wishes to appeal an award, the parties shall follow the then current CPR Arbitration Appeal Procedure. Buyer and HighCom Armor Direct agree not to file or join any class action or class arbitration, seek or consent to class relief, or seek or consent to the consolidation or joinder of its claims with those of any third party. If any clause within this Arbitration Provision (other than the agreement regarding the conduct of the arbitration in the preceding sentence) is found to be illegal or unenforceable, that clause will be severed from this Arbitration Provision, and the remainder of the Arbitration Provision will be given full force and effect. If such agreement regarding the conduct of the arbitration is found to be illegal or unenforceable and if the arbitrators permit a class arbitration or consolidated or joined matter to proceed, this entire Arbitration Provision will be unenforceable, and the dispute may be decided by a court. The obligations set forth in this paragraph shall survive the termination or expiration of this Agreement.

19. In addition to this Agreement, any Special Conditions of Sale set forth on the invoice issued by HighCom Armor Direct or in the current price list for the products or services sold hereunder shall apply and are incorporated by reference. HighCom Armor Direct reserves the right to reject any Order at its discretion. No Buyer purchase order terms shall be valid. Unless otherwise specified therein, title, liability for and risk of loss to Product sold hereunder passes to Buyer upon loading for shipment at HighCom Armor Direct’s producing location.

20. This Agreement shall be construed and governed by Delaware law, without regard to any applicable conflicts of law provisions, and the terms of the UCC, rather than the United Nations Convention on Contracts for the International Sale of Goods, shall apply. Except as expressly provided in any other term or condition of this Agreement, any provision hereof which is prohibited or unenforceable in any jurisdiction shall, as to such jurisdiction, be ineffective only to the extent of such prohibition or unenforceability without invalidating the remaining provisions hereof or affecting the validity or enforceability of such provision in any other jurisdiction.

21. This Agreement supersedes all prior agreements, representations and understandings between the parties (whether written or oral) with respect to its subject matter and constitutes (along with the exhibits and schedules attached hereto) a complete and exclusive statement of the terms of the agreement between the parties with respect to the provision of products or services hereunder. This Agreement shall apply to all sales made to Buyer by HighCom in the past and in the future.

22. Not by way of limitation of the unqualified nature of the foregoing, Buyer acknowledges, agrees and represents that it is not relying upon, and it has not been induced by, any representation, warranty, statement made by, or other information provided by HighCom Armor Direct in connection with its decision to purchase or use any product, service, information or technology, other than the representations and warranties made by HighCom Armor Direct as and only to the extent expressly provided in this Agreement.

23. No modification of this Agreement shall be binding upon HighCom Armor Direct unless separately contracted in writing and executed by a duly authorized representative of HighCom Armor Direct. No modification shall be affected by the acknowledgment or acceptance of purchase order forms stipulating different conditions. No pre-printed terms of any purchase orders or other documents provided or issued by the Buyer shall apply. Unless Buyer shall notify HighCom Armor Direct in writing to the contrary as soon as practicable after receipt of this invoice by Buyer, Buyer shall be deemed to have accepted the terms and conditions hereof and, in the absence of such notification, Buyer’s acceptance or use of the products, services, information or technology shall be equivalent to Buyer’s assent to the terms and conditions hereof. HighCom Armor Direct reserves the right to update, change or replace any part of these Terms and Conditions by posting updates and/or changes to our website. It is Buyer’s responsibility to check this page periodically for changes.

Last updated: November 11th 2025

RF2 Positive buoyant plates that defeat M855 green tip

Engineering Floating Plates

HOW IT WORKS

IDEAL FOR ALL MARITIME OPERATIONS