HighCom Answers Police Call for Rifle-Rated Armor Plates
In July 2017, Commander for the Training Division of the Charleston Police Department in West Virginia, Sergeant Chris Johnson, and his department were among several police departments around the United States considering rifle-rated body armor for its officers. When Charleston City Council approved the purchase of $114,000 in body armor, equipment, and medical trauma supplies for the department, Sgt. Johnson knew they would require stronger body armor following yet another tragedy in the country where in Dallas, a man wielding a rifle killed five officers and wounded seven.
Now, no longer deployed just by SWAT and Military, Law Enforcement agencies all over the country have responded to these changing threats with an increased demand for life-saving rifle-rated protective armor for their patrol officers.
Charleston Police Department became one of those agencies. Yet its requirement for rifle-rated armor was going to have to exceed industry standards, and the bullet-resistant plates were going to get tested far beyond their usual limits.
Charleston Police Sergeant Chris Johnson inspecting rifle armor plates. Image Credit: Charleston Gazette-Mail
Challenge
Five body armor companies submitted samples to Sgt. Johnson’s team for testing to determine if the armor plates could withstand conditions the department required to not only stop rifle threats, but stop high-velocity ammunition at a very close distance. Among the five companies, HighCom Armor presented its Guardian AR1000™ hard armor plate for testing. The AR1000 is a lightweight, stand alone plate providing Level III+ rifle protection engineered from Ultra High Hardness armor steel (UHH) and covered in a polyurea ballistic fragment anti spall coating Rhino Extreme™ 11-50.
Put to Test
To test the submitted armor samples to their limits, the team clamped rifles to a table and fired them using a 100-foot paracord as a chronograph to measure the speed of each bullet, and a ballistic shield protected the officers from the shrapnel coming off the armor plates.
The National Institute of Justice (NIJ) ballistic standard requires body armor to stop a bullet from 50 feet away, but Johnson’s department said, “Most police officers find themselves within about 20 feet of their attacker.” They needed to test the limits for the worst possible scenario and set up testing the armor from a mere 15 feet firing range. “Some plates didn’t hold up,” Johnson said. “I’m sure they probably would have at the testing levels of NIJ standards, but not our standards.”
While certain bullets ripped through the other sample plates, the same ammunition left only a slight dent in HighCom’s AR1000 Level III+ plate. Taking the scenario to the extreme to compare other plates against HighCom Armor’s, “We even tested Level IV plates, which is the highest level of protection and what we have now, or what we’re getting now; it surpassed that,” Johnson stated.
Based on what testing was demonstrating, Johnson had some suggestions for HighCom and spoke with CEO/President, Mike Bundy that evening. The next day, a new prototype plate arrived in the mail.
Solution
As with many concerns with body armor, Johnson’s highest concern was with the spall or “shrapnel” that gets created as a bullet makes an impact with something like a metal plate. “When the bullet hits the metal, it fragments,” Johnson said, “and those fragments are high-velocity little shards of metal, just like a grenade.” This is where the protective polyurea ballistic fragment anti-spall coating Rhino Extreme™ 11-50 is a critical component of HighCom’s steel plates, as it prevents the occurrence of spall when a bullet makes contact with the plate.
HighCom Armor went on to send several additional prototypes, and following rounds of testing and suggestions between the two teams, they worked towards the ultimate goal of creating a plate that could perform to the Charleston Police Department’s intensive high standards and requirements for body armor worn by its officers.
Johnson’s intensive testing and expectations on armor protection gained attention at Law Enforcement agencies in West Virginia and surrounding states, while his input on the evolving design and re-test of the prototypes ultimately helped HighCom Armor create a final plate design officers in Charleston could confidently wear to protect against close-range rifle threats.
“Although we’re a for-profit entity, our #1 focus is protection,” Bundy said. “We build a lifesaving product, so we really try to work hard with our partners to deliver a solution as quickly as we can.”
Established in 1997 in the Bay Area of California, HighCom Armor is based in Columbus, Ohio, and sells body armor to customers worldwide. With millions of armor deployed since, HighCom Armor is honored to report its commitment to producing some of the most advanced ballistic armor in the world that still today, has never had a failure, a penetration, or a recall.
Rifle Armor has been in deployment primarily for Military and Law Enforcement special tactic units for defeating long rifles and larger caliber and higher velocity rounds for many years. While most of Law Enforcement has relied on armor protection, designed to defeat handgun threats up to 9mm, .357, and 44 mags, today, there is a clear and present danger in domestic urban or rural settings as Law Enforcement and First Responders come up against higher velocities and long rifle threats in the form of AR15, AK47, and various hunting style rifles utilizing common .223, 5.56, 7.62, .308, 30.06 and other high-velocity and penetrating rounds.
Original story first published in the West Virginia Gazette-Mail, July 19, 2017, updated November 22, 2017 by Giuseppe Sabella
HighCom Armor Ballistic Shield: Testimonial of its Protective Capabilities
As a global provider of body armor and personal protective equipment, HighCom Armor has been designing, developing, testing, manufacturing, and distributing dozens of National Institute of Justice (NIJ) compliant hard and soft body armor products, as well as other high-quality ballistic and personal protective gear. Thousands of customers from the United States Military and Law Enforcement communities to governments and agencies around the globe have come to depend on our advanced ballistic manufacturing processes. In addition to supplying Military and Law Enforcement agencies with life-saving protective equipment, for over two decades, HighCom provides private label/OEM hard and soft armor solutions to some of the largest defense companies and manufacturers for end use by military and law enforcement. Among the Law Enforcement agencies HighCom works with, Clarksville Tennessee Police Department shared a testimonial to the protective capabilities of the Bellfire™ ballistic shield.
Clarksville Tennessee Police Department
Clarksville Tennessee Police Department purchased a HighCom Armor Bellfire ballistic shield under a private label/OEM through one of its highly valued partner distributors, and it is from where Sergeant Robert Blamer shared a story from his Department that speaks not only to the importance of Law Enforcement having only the highest quality armor on-hand and ready for quick deployment, but also to the level of quality service customers’ will experience when purchasing armor systems from HighCom and its reputable partner distributors.
The Situation
Responding to a suicidal subject call after midnight in July of 2021, Clarksville Tennessee Police Department’s Sergeant Robert Blamer and the dispatched team were debriefed on a situation of a subject barricading themselves in a downstairs room with a handgun. Familiar with the shield and its capabilities having used it on several occasions with his department’s tactical unit, Sgt. Blamer grabbed the 24×48 ballistic shield, which is manufactured using a UHMWPE based material with an exterior cover of polyurea with Rhino Extreme 1150R Anti Spall Coating and a 4” x 16” ballistic viewport, from the precinct prior to heading to the scene.
Sgt. Blamer detailed prior to his arrival, “His Officers attempted to call out to the individual in the residence to attempt to negotiate a peaceful outcome and to make entry,” including, “retrieve a 2-year-old child [who] was sleeping in an upstairs bedroom.” It was then, “The subject fired off a round immediately upon entry, causing the Officers to back out and hold the front door entryway.”
The Situation Intensifies
Sgt. Blamer arrived on scene and brought the shield to the doorway, set up a team, and entered. “We moved behind the shield and set it facing toward the rooms the subject was believed to be in,” Sgt. Blamer stated. “This allowed Officers to quickly go upstairs and get the child outside to safety, [where] “we continued attempting to call out to the subject from the front door utilizing the shield as cover.”
“A large cloud of smoke became visible, and the subject stepped out holding the handgun as Officers pleaded [for him] to put it down.” Sgt. Blamer and the team, “Realizing the subject had set the house on fire, we stayed in place continuing to attempt to negotiate until the heat and smoke forced us to back away to the roadway.”
Fortunately, “A negotiator arrived, and we continued to talk out the subject using the shield in conjunction with a patrol car for as much cover as possible,” Sgt. Blamer said. Following a very intense exchange, the team was able to gain control of the situation and, “The subject was taken into custody in the front of the residence, as it was fully engulfed in flames.”
The Result
Sgt. Blamer recalls the situation highlighting the importance of having the shield that day. “The shield provided the safety and confidence to attempt to negotiate with an armed subject who was as close as 15 feet way at times during a two-hour standoff,” stating, “the shield, along with good tactics were instrumental in a positive resolution with no injuries to the subject or Officers.”
The Story Continues
With the shield acting as an armored wall of protection between an armed subject inside a home engulfed with flames, and Officers on a mission to protect the life of a 2-year-old child, disarm an intensely charged situation, and ensure the safety of the Officers and all who were involved in the standoff, the shield’s viewport ended up getting warped by the heat of the flames from the house. Although the viewport was damaged by the intense heat of the fire, the shield itself suffered no damaged to its exterior, but without use of the protective viewport, the shield needed repair as quickly as possible.
The Repair
Sgt. Blamer reached out to the partner distributor about the viewport and immediately they notified HighCom Armor of an urgent repair that needed to be done on the shield.
Recognized for their commitment to exceptional customer service and having a deep understanding to the urgency for Law Enforcement agencies to have armor on-hand and ready to deploy without notice, the partner distributor and HighCom jumped into action. Working with the distributor partner, HighCom Armor readily accepted the damaged shield and submitted the RMA with return label at no cost to Clarksville Police Department. Clarksville Police Department shipped out the shield which was received on August 17th. The shield was immediately repaired and shipped back to Clarksville Police Department on August 18th via Priority Overnight; ensuring Sgt. Blamer and his Department would not go long without it.
Conclusion
The shield arrived back at the precinct with Sgt. Robert Blamer within 24 hours testifying to the exceptional commitment to service by HighCom and its partner distributors to get the armor back to Sgt. Blamer as quickly as possible. The quick turnaround time also demonstrated that whether it is Clarksville Tennessee Police Department, or any other agency, purchasing and deploying HighCom Armor ballistic armor and protective equipment, all can rest assured they will not only receive the highest performance of protection from a HighCom Armor product, but they will also have these life-saving products ready for deployment at any given moment the situation calls for them to use it.
Quoted testimonial from Sgt. Robert Blamer describing the situation occurring after midnight on 7/14/21.
Interested in Learning More about HighCom’s Shields?
Level II Soft Armor Exceeds Protection Standards Passing Special Threat Testing
HighCom Armor’s Trooper sa2910™ Soft Armor Panel is an armor panel currently in use by Law Enforcement and First Responders due to its ultra-lightweight construction and high performance for everyday wear. Utilizing the latest technology and advanced engineering for a lightweight, flexible design and carrying NIJ 0101.06 Certified Level II stand-alone protection against handgun rounds, the Trooper sa2910 Soft Armor Panels provide the ideal protective armor solution against common threats facing many frontline operators.
Level II Testing Standards
The NIJ requires rigorous testing conditions and protocols in order for soft armor to receive NIJ 0101.06 certification against certain Level II handgun rounds, yet currently, no certification program exists for soft armor to receive certification against special threats. The table below details the NIJ Level II threats the Trooper sa2910 Soft Armor Panels are certified to protect against.
Standard
Weapon
Projectile
GR
Vel FT/S
Vel M/S
(+/- FT/S)
V50 FT/S
V05 FT/S
NIJ 0101.06
Handgun
.40 S&W Full Metal Jacketed (FMJ)
180
1155
352
(+/- 50 fps)
x
x
NIJ 0101.06
Handgun
9mm Full Metal Jacketed Round Nose (FMJ RN)
124
1305
398
(+/- 50 fps)
1689
1598
NIJ 0101.06
Handgun
.357 Magnum Jacketed Soft Point (JSP)
158
1430
436
(+/- 50 fps)
1631
1520
Request for Testing
Recently, HighCom Armor was approached by a client requesting facilitating additional testing on the Trooper sa2910 Soft Armor Panel beyond current Level II standards to handgun special threats they are seeing in the field.
Testing
The Trooper sa2910 was submitted to one of HighCom’s third-party partnered NVLAP accredited ballistic laboratories for testing, where the soft armor panel was tested against various projectiles and ranges, including contact shots from 9mm +P+ (SXT), as well as 7.62 x 25mm Tokarev 85 gr FMJ, .357 SIG, 125-grain Gold Dot Hollow Point (GDHP), and .357 Sig 125gr T-series, Winchester Ranger. The unique ballistics testing went beyond the NIJ Standard 0101.06 Level II Threat testing against the 40 S&W Full Metal Jacketed (FMJ), 9mm Full Metal Jacketed Round Nose (FMJ RN), and the .357 Magnum Jacketed Soft Point (JSP) handguns which is currently listed on the NIJ’s Compliant Product List (CPL).
Special Threat Testing Outcome
The performance outcome of the Trooper sa2910 was significant, as testing demonstrated the soft armor panel passed testing against additional special threats, which is uncommon to receive for a Level II package. With its multi-hit capabilities against NIJ 0101.06 certified handgun threats, end users can also rest assured knowing if faced against special threats outside common handgun projectiles during deployment, the Trooper sa2910 is going to perform beyond the certified standard by the NIJ for Level II soft armor.
Below is the complete list of special threats the Trooper sa2910 demonstrated to protect against following recent testing.
Standard
Weapon
Projectile
GR
Vel FT/S
Vel M/S
(+/- FT/S)
Special
Handgun
9mm +P+ (SXT)
127
1340
408
Contact Shot
FBI
Handgun
5.7 x 28mm SS195, Lead Free Hollow Point (LFHP)
27
2000
610
(+/- 30 fps)
FBI
Handgun
5.7 x 28mm SS197, Hornady V-Max Blue Tip
40
1790
546
(+/- 30 fps)
Special
Handgun
7.62 x 25mm Tokarev 85 gr FMJ
85
1475
450
(+/- 30 fps)
Special
Handgun
.357 SIG., 125-grain Gold Dot Hollow Point (GDHP)
125
1375
419
(+/- 30 fps)
Special
Handgun
.357 Sig 125gr T-Series, Winchester Ranger
125
1350
411
(+/- 30 fps)
MIL-STD 662f
Frag
US MIL-STD Frag 2 gr. RCC
2
2431
741
x
MIL-STD 662f
Frag
US MIL-STD Frag 4 gr. RCC
4
2041
622
x
MIL-STD 662f
Frag
US MIL-STD Frag 16 gr. RCC
16
1798
548
x
MIL-STD 662f
Frag
US MIL-STD Frag 64 gr. RCC
64
1615
492
x
MIL-STD 662f
Frag
US MIL-STD Frag 17 gr. FSP
17
1695
517
x
Capable of Level III+ Protection when worn with the Guardian 3i7m
The Trooper sa2910 was further tested with our Guardian 3i7m™ ICW Level III+ plate by an independent NIJ laboratory according to the NIJ 0101.06 standard of protection. We are thrilled to announce that the sa2910 is capable of stopping Level III+ threats when worn in conjunction with the Guardian 3i7m.
Below are the Level III rounds the sa2910 has been tested to ICW with the 3i7m.
Standard
Weapon
Projectile
GR
VEL FT/S
VEL M/S
(+/- FT/S)
NIJ 0101.06
Rifle
7.62mm FMJ, Steel Jacketed Bullets (M80)
147
2780
847
(+/- 30 fps)
Special
Rifle
7.62 x 39mm Mild Steel Core
123
2400
731
(+/- 50 fps)
Special
Rifle
5.56 x 45mm M193
55
3250
991
(+/- 50 fps)
Available Panel Types
HighCom Armor’s Trooper sa2910 Soft Armor Panels are available in Concealable, Tactical, BALCS/CIRAS, APC, Torso, and Side Cummerbund panel types providing complete 360-degree protection for the operator.
Announcing HighCom Armor’s New Plate Carrier Fall Lineup
Coming Fall 2021!
We are excited to announce the arrival this Fall of four new HighCom Armor Plate Carriers designed specifically to meet the demands and requirements of today’s operators.
Trooper ACAP Gen 2™
The Trooper ACAP Gen 2 (Advanced Carrier Armor Patrol) is our latest evolution on our popular ACAP plate carrier system and was engineered from the valuable feedback from a US Law Enforcement special operations team. The ACAP Gen 2 is loaded with new upgrades and features such as Cobra Buckles Quick Release Cummerbund, removable triple open-top M4 mag insert, kangaroo pouch, and premium interior and shoulder mesh padding for added comfort for prolonged deployment wear time.
Key Features
Torso Padding for Maximum Comfort
Integrated Open-top M4 Mag Insert
Padded Shoulder Straps
Quick Detach Cobra Buckles (can be fitted to left or right side)
Trooper LVPC™
The Trooper LVPC (Low Vis Plate Carrier) is designed to give the wearer the desired level of protection while maintaining a lower tactical signature for low visibility or plain clothes operations. Built from advanced Laser Cut material and featuring Hypalon® shoulder straps, the LVPC provides operators with an extremely durable carrier system in a slim profile.
Key Features
Low Visibility
Low Profile
Lightweight
Trooper CPC™
The Trooper CPC (Concealable Plate Carrier) offers a small armor footprint and is easily concealed under a jacket or shirt without restricting mobility. Lightweight and built from advanced Laser Cut material, the CPC was designed for operators needing a highly concealable plate carrier for covert missions or daily undercover wear.
Key Features
Highly Concealable
Low Profile
Easily Stowed
Trooper MPC™
The Trooper MPC (Modular Plate Carrier) supports operator mobility and high functionality in a robust carrier platform for any Active Shooter response. Extremely comfortable with mesh-lined padding for extended duty, the MPC was designed to keep you agile. The carrier’s modular system allows for attachments on all sides for a customizable set-up (magazines, tourniquets, etc.) and features an interchangeable cummerbund system with side plate pockets for extra protection or nylon webbing strap with side buckle. Plate pockets accommodate sizes 10×12 to SAPI M up to 1.25” in thickness as well as torso soft armor panels.
Key Features
Modular
Super Comfortable
Enhanced Mobility
Interchangeable Cummerbund
Stay tuned for the official release of these new plate carriers and for more information on where to buy.
If you are interested in additional HighCom Armor products available now and where to buy, check out our How to Buy page. Body Armor or Tactical Gear and Equipment dealers can contact us at [email protected] or submit an inquiry here to learn more about selling our armor products by becoming a strategic partner through joining our Partner Program.
HighCom Armor Rifle Armor Kit (RAK) – A Customizable Single Package Armor Solution
Rifle Armor has been in deployment primarily for Military and Law Enforcement special tactic units for defeating long rifles and larger caliber and higher velocity rounds for many years. While most of Law Enforcement has relied on soft armor protection, designed to defeat handgun threats up to 9mm, .357, and 44 mags.
Threats Today
Today, there is a clear and present danger in domestic urban or rural settings as Law Enforcement and First Responders come against higher velocities and long rifle threats in the form of AR15, AK47, and various hunting style rifles utilizing common .223, 5.56, 7.62, .308, 30.06 and other high velocity and penetrating rounds, that soft armor simply is not capable of defeating or protecting against. We believe the need has arrived to consider rifle armor upgrades to provide officers the only protection capable of defeating these threats.
Answering the Call
In recognition of the growing risk from rifle threats, we developed the Rifle Armor Kit, or RAK, program to expand the concept of an active shooter kit to a variety of situations and to provide a customizable armor solution in an easy-to-understand package.
Each RAK includes (1 carrier), (2) hard armor plates and (2) I.D. placards. The kit can be customized to operator needs based on type of plate carrier, desired protection and plate cut, and I.D. inscription. Pouches, carrier bags, and other accessories are also available. All components of the RAK are manufactured in the USA!
Outfit the RAK in 3 easy steps:
Step 1: SELECT PLATE CARRIER
Step 2: SELECT RIFLE PLATES
Step 3: SELECT I.D. PLACARD
STEP 1: PLATE CARRIERS
Trooper™ CAP
The Trooper™ CAP, Carrier Armor Patrol is a cost-effective solution designed to outfit any size agency with a plate carrier capable of accepting the most common sized hard armor rifle plates while outfitting the broadest range of body types. Ideal for patrol officers, the CAP can be donned and doffed quickly.
Trooper™ CAP RESCUE
The Trooper™ CAP Rescue, Carrier Armor Patrol Rescue is designed for FIRE/EMS personnel during Active Shooter and Critical Incident responses without limiting mobility. The CAP Rescue is a cost-effective solution designed to outfit any size agency and capable of accepting the most common sized hard armor rifle plates while outfitting the broadest range of body types. The CAP Rescue features 360 high-vis reflective material to keep operators visible while engaged in life-saving missions.
Trooper™ ACAP
The Trooper™ ACAP, Advanced Carrier Armor Patrol accommodates common hard armor rifle plate sizes and can be outfitted with cummerbund soft armor inserts and deltoid soft armor attachment for added protection. Option to upgrade cummerbund to larger size or order with quick release. Designed for everyday wear, the ACAP offers a basic and flexible carrier system for armor patrol officers.
Trooper™ ACAP RESCUE
The Trooper™ ACAP Rescue, Advanced Carrier Armor Patrol Rescue accommodates common hard armor rifle plate sizes and can be outfitted with cummerbund soft armor inserts for added protection. The ACAP Rescue provides a carrier for ballistic protection for FIRE/EMS personnel during Active Shooter and Critical Incident responses without limiting mobility. The ACAP Rescue features 360 high vis reflective material to keep your team visible while engaged in life saving missions.
Trooper™ APC
The Trooper™ APC, Advanced Plate Carrier is designed and built on the popular APC ballistic cut panel platform and accommodates soft ballistic panels, Level III or IV hard armor plates, protector attachments, and pouches. Ideal for operators seeking benefits and protection of a tactical vest with the simplicity of a plate carrier. Fully adjustable “one size fits all” configuration with the benefit of scale up or down to meet mission requirements, the APC provides greater coverage than your typical plate carrier.
Trooper™ APC RESCUE
The Trooper™ APC Rescue, Advanced Plate Carrier Rescue is designed for FIRE/EMS personnel during Active Shooter and Critical Incident responses. Built on the popular APC ballistic cut panel platform and accommodates soft ballistic panels, Level III or IV hard armor plates, protector attachments, and pouches. Ideal for operators seeking benefits and protection of a tactical vest with the simplicity of a plate carrier. The APC Rescue features 360 high vis reflective material to keep your team visible while engaged in life saving missions.
STEP 2:RIFLE PLATES
With today’s growing threats the need for rifle armor protection is greater than ever. Our Guardian™ Level III and IV Hard Armor Plates go above and beyond industry standards to meet and exceed mission-critical requirements. Available in ceramic, super lightweight UHMWPE, and steel, Guardian™ plates provide multi-hit protection from high velocity rifle rounds.
Choose from level IV, III, or rifle special threat for multi-hit protection from high-velocity rifle rounds. RAKs are compatible with the Guardian™ hard armor plates 4s17, 3s9, 3s11, AR1000, AR500, and RSTP. Plates are available in 10”x12” single curve in full or shooters cut. NIJ 0101.06 certified plates come with a 10-year warranty and can be found on NIJ’s CPL list (Compliant Product List).
4s17
3s9
3s11
ar500
ar1000
RSTP
Protection
Level IV SA
Level III++ SA
Level III SA
Level III+ SA
Level III+ SA
Level III+ ICW
Rifle Armor Warranty
10 yrs
10 yrs
10 yrs
10 yrs
10 yrs
5 yrs
Weight (10”x12” shooters cut)
7.2 lbs
5.3 lbs
2.9 lbs
7.3 lbs
5.8 lbs
2.9 lbs
Made in the USA
x
x
x
x
x
x
Multi-Hit
x
x
x
x
x
x
NIJ 0101.06 Certified
x
x
x
x
x
TESTED
DEA Protocol
x
x
x
x
Special Threat Tested
x
x
x
Rifle M-1 NIJ06 7.62 x 63mm AP M2
x
Rifle M-16/AR-15 5.56 x 45mm M855/SS109
x
x
x
x
x
Rifle M-16/AR-15 5.56 x 45mm M193
x
x
x
x
x
Rifle AK-47, M, SKS 7.62 x 39mm MSC
x
x
x
x
x
x
Rifle FN FAL 7.62 x 51mm M80
x
x
x
x
x
x
Rifle 5.56 x 45mm M855A1
x
x
STEP 3:I.D. PLACARDS
I.D. Placards are constructed from the same material as the plate carrier and match the carrier color. Choose text color, letters are available in black, white, grey, gold, or fluorescent lime yellow. Choose POLICE, SHERIFF, or CUSTOM text.
PROTECTING THOSE WHO PROTECT US
HighCom Armor is committed to providing only the highest quality armor systems that meet or exceed NIJ and industry standards for performance and quality, and our RAK armor solution is one of our latest product offerings available, that is an easy-to-understand customizable armor solution package for Law Enforcement and First Responders to ensure those who protect us, are always protected.
In Stock and Ready to Ship Body Armor Inventory Updated Daily for HighCom Partners
HighCom is proud to supply over 200 unique models of Body Armor, Gear and Accessories, and Personal Protective Equipment “PPE” solutions for Law Enforcement and Military End Users around the world through our contract vehicles and partner program.
With thousands of SKUs ranging in models, types, sizes, curvatures, cuts, colors, weights, thicknesses, configurations, and custom buildouts, we are pleased to bring forward quick and easy access to same or next day shipment products through our website listing of in-stock inventory.
Fast, reliable fulfillment of in stock products
Introducing QuickShip to partners! QuickShip is our commitment to urgent time-sensitive fulfillment of readily available armor and protective products offered by HighCom Armor allowing for fast shipment of on the shelf ready-to-release products to maximize speed and responsiveness, while reducing overall standard lead times on shipping.
It leverages our continuing manufacturing and global supply chain improvements to help you improve competitiveness and support to frontline operators.
HighCom currently carries roughly 230 in-stock products with roughly 28,000 units combined ready to ship globally upon request.
Inventory updated daily for fast shipment
Find the right product for your operational needs through our QuickShip Program.
All product information can be found on product pages including product specification sheets and other downloadable resources. The quickest way to find a specific product page is to put the product name in the global search bar. If you have any questions about our products, please do not hesitate to reach out.
An invoice will be generated after your order has been processed and shipped. Your order payment will be based off your terms and shipping will be an additional cost. We will ship your order according to your preferred shipping method unless directed differently. If you do not have a preferred shipping method in place, we will ship the best way possible whether that be by FedEx ground, freight, etc.
Estimated shipping dates will be provided upon order confirmation. Please include any special requests when you place your order.
At HighCom Armor, we are dedicated to empowering our veterans and providing continuous support to our national heroes, both during and after they serve. Check out some veteran-owned business picks chosen among the staff here at HighCom Armor for sharing in celebration of Military Appreciation Month and beyond. Be sure to keep supporting the military heroes who account for over 3 million+ proud veteran business owners all over the country.
Flags of Valor
Founded in 2015 by two veteran special operation pilots, Joe Shamess and Brian Steorts, Flags of Valor (FOV) offers patriotic products proudly handmade by combat veterans. The majority of its employed craftsman are service-disabled, and some with significant combat-related injuries. FOV awards these heroes a return to work and renewed purpose, alongside a core dedication to remembering, employing, and empowering our Nation’s heroes. A veteran-owned, veteran-operated, and veteran-made company, the hand-crafted wooden American flags and various other products it sells help raise money for veteran and public service charities and has raised over $1.35M to date based on current statistics on its website. FOV has been featured on many national news networks and continues to grow and expand its efforts through recognition and attention received to its tireless work promoting veteran issues and stories of courage. FOV is definitely one of HighCom Armor’s favorite veteran-owned businesses. Photo Credit: Flags of Valor
Nine Line Apparel
Nine Line Apparel having started in 2012 by a military veteran and his wife in their home garage, and since then, owners Tyler and Angela expanded the company to a 60,000 square foot facility on the outskirts of Savannah, Georgia. In the military, Nine Line is medevac request for a soldier that is injured on the battlefield. For soldiers, a Nine Line “symbolizes patriotism, hope, and trust in one’s countrymen.” These themes carry through every aspect of Nine Line Apparel’s product offerings, as well as to the core of its business. Customers can support its patriotic mission purchasing everything from apparel for men, women, and kids, to accessories, bags, drinkware, tactical gear, and so much more. All products line themes are inspired around first responders, the 2nd Amendment, veterans, and its famously “relentlessly patriotic” designs. In addition to the fantastically patriotic products sold, at its core, Nine Line is a give-back organization and support numerous initiatives for military, first responders, disaster relief, and more. Nine Line demonstrates its commitment in providing ongoing support of charities that inspire unity and brotherhood among all Americans. You can learn more about its Foundation at www.ninelinefoundation.org. Photo Credit: Nine Line Apparel website
Large Marge’s Philly Cheesesteaks
Opened in 2007 by Marge, Large Marge’s Philly Cheesesteaks is a family-owned restaurant located in Wheat Ridge Colorado. When Marge retired in 2012, she sold the restaurant, recipes, and procedures to Tyler Johnson, who kept the traditions and flavors alive for all patrons who come and sit down for a bite, are all considered family. In addition to feeding the local community, Large Marge’s serves its authentic philly cheesesteaks on Amoroso roll, hoagies, grinders, and other delicious finds at various Colorado festivals, city activities, events, and annually at the Sturgis Rally in South Dakota. Large Marge’s was voted the “Best Philly Cheesesteaks” in 2011 by the Best of Westward awards and continues to be featured on various news networks for its locally infamous sandwiches. Probably the best philly outside of Philly, anyone visiting the state needs to take the short drive to Wheat Ridge and support this local veteran-owned business. We promise your tastebuds will thank you! Photo Credit: Large Marge’s Philly Cheesesteaks website
Black Rifle Coffee Company
Founded by Evan Hafer and owned by all former members of the US armed forces, Black Rifle Coffee Company is a veteran-owned coffee company based on Salt Lake City, Utah that is not your typical coffee company. Its high-quality coffee beans are imported from Colombia and Brazil and they roast 5 days a week in its facilities in Manchester, TN and Salt Lake City, UT and all coffee choices reflect the common purpose in serving premium coffee to those who love America. With a mission dedicated to supporting military, law enforcement, and first responders, BRCC is just a powerhouse of a coffee company and so much more. They offer a coffee club subscription for brews, apparel and gear for purchase, and the website’s national hero features just makes you proud to be American. They have a can’t miss blog and its Coffee or Die Magazine has some of the best written articles to get coming through the inbox. Go ahead and get your Black Rifle Coffee on, and support this veteran-owned company! We sure do! Photo Credit: Black Rifle Coffee Company featured on Military.com
Bearded Veterans Club
Founded by veteran Chris Steel, Bearded Veterans Club offers premium beard-care products serving patriots, first responders, and veterans who are seeking the best quality beard care products. 100% USA made, these beard products smell great, moisturize, strengthen, and help grow beautiful, healthy beards, and are made all in support of military and private sector “men and women putting their lives on the line to preserve liberties, freedoms, rights, health, and wellness.” In addition to the incredible product offerings, its Operation #FREEDOMBEARD was borne out of being in the military where beards are not an option and shaving happens every day. Aptly put, upon retiring from active duty, the time calls to grow a Freedom Beard, where Chris writes, “I served my country, then I grew a beard.” You can order beard care products individually or in sets, as well as apparel and your very own “combat comb” all from the website. Photo Credit: Bearded Veterans Club website
Combat Flip Flops
Launched in 2012 by Army Ranger veterans, Matthew Griffin, Donald Lee, and Andy Sewry, Combat Flip Flops is a company with an incredible purpose. This veteran-owned business began after Matthew and Donald received a calling following serving in Afghanistan to create sturdy military-themed flip flops and footwear made from leather and military-grade nylon and use profits to support education for Afghan girls. Since its founding, the company has expanded its line of merchandise to include everything from men’s and women’s apparel, shades, jewelry, and other gear and accessories. Profits continue to support the organizations Aid Afghanistan for Education (AAE) providing “education to marginalized women and children in Afghanistan as well as The Station Foundation (TSF), a non-government agency providing resources to help members and families of the Special Operations Community, while efforts have created opportunities of employment and education in Bogota, Colombia, Kabul, Afghanistan, and Laos where locals are leading the way in the core merchandise manufacturing and hand-crafting. Visit the website to purchase the amazing merch and to learn more about the “Goodness” Combat Flips Flops is doing these days. We know you are gonna love its “Floperators” that are branded by “Bad for Running. Worse for Fighting”! Photo Credit: Combat Flip Flops website
Bottle Breacher
Founded by former Navy Seal, Eli Crane and his wife Jen in Arizona, Bottle Breacher brought recycled, authentic decommissioned .50 caliber bottle breachers to the masses. These bottle openers are some of the coolest bottle openers on the planet! Designs are themed around everything from military branches and first responder themes to groomsman & bridesmaid gifts, Father’s Day, American Flags, US states, hunting and fishing, to customized designs. The company has expanded to offer even more gear and apparel available for purchase too. Its mission is all driven by giving back and supporting Military and Veteran Non-Profits, including America’s Mighty Warriors (AMW),Vet Tix, Joggin’ for Frogmen, Wishes for Warriors, and many more. Percentage of product sales go to support the Non-Profits and are all mentioned on its website for where purchases help fund the various organizations. In addition to its own line of merchandise, Bottle Breacher partners with Law Enforcement Today, Ever Onward, VFW, and others to offer additional products supporting the efforts, work, and community of military, law enforcement, and veterans. Be sure to check them out! Photo Credit: Bottle Breacher website
Sandboxx
Sandboxx is one of those service-providing companies that is just awesome. SandBoxx offers a few things to keep families in the military community connected. First, the App allows loved ones to write letters like writing emails to their loved ones on base from their mobile phones, but the App then sends the message for print and mails out for delivery to the military base where family members are stationed. Instead of loved ones lagging through the process of sending thoughts and prayers to their family members first on paper, then to post office, and then finally arriving to their loved ones, Sandboxx takes care of it all, and as frequently as you want. You even receive a tracking link so you know when letters arrive. Servicemen can write back too with branch-specific reply stationery. It also provides a service for sending Biblical versus to recruits at different intervals too. New recruits always know they are being thought of while away at basic training. In addition to the APP, you can also purchase apparel, gift cards, and letter add-ons to send. The website even has a News and Resources area where family members can read up on what happens or what to expect during basic training or military service life in general for all the branches. Anyone needing an easy way to stay connected with their military enlisted or serving family members, Sandboxx is it. Photo Credit: Sandboxx website
Pizzeria Rustica
Pizzeria Rustica was founded in 2008 by David Brackett, a 31-year US Air Force Colonel and Fighter Pilot veteran in 2008. Inspired by Brackett and his wife’s 14 years’ in Europe while serving the military, Brackett brought the authentic taste of a “generations-old neighborhood trattoria in Italy” to Colorado Springs, Colorado. This Neapolitan wood-fired pizzeria, Pizzeria Rustica has been awarded multiple distinctions including Best Pizza and the 4-Star Certified Green Restaurant rating, the highest rated in all of Colorado and the 11th in all of the United States. For visitors, it is the rustic wood-fired pizzas that are its claim to fame. Pizzeria Rustica makes its dough every day using flour imported from Italy, San Marzano tomatoes sourced from the base of Mount Vesuvius near Naples, yeast from off the coast of Naples, and uses sea salt in its recipes. And the mozzarella. The mozzarella gets stretched to a soft, silky consistency every day from fresh curd brought in from Wisconsin daily. For ingredients not sourced from Italy, they only buy local to ensure the freshest ingredients are always used across the menu. If you are interested in taking your tastebuds to an authentic Italian trattoria while in Colorado Springs, this veteran-owned pizzeria is on the itinerary. Photo Credit: Pizzeria Rustica featured on Bring Fido
Sword & Plough
Sword & Plough was founded in 2012 by military family sisters Emily Núñez Cavness and Besty Núñez when Emily, a veteran herself, was participating in the Reserve Officers’ Training Corps program at Middlebury College. This Denver-based company utilizes military surplus material of leather, fabric, and hardware to create high-quality, fashionable bags, totes, work and travel bags, and jewelry. The sisters grew up in a military family at West Point and the entire company is structured around supporting the military, veterans, and military-focused charitable organizations and causes across every aspect of the business. From employing veterans to repurposing military surplus for their products, donating 10% of its profits to veteran organizations such as Got Your 6 and Team Red, White & Blue, and strengthening civil-military understanding, Sword & Plough is truly making an impact for veterans and military causes at a global level. Products are available on their website, its Denver showroom, various retailers, and through its Brand Managers. Photo Credit: Sword & Plough featured on Wide Open Country
The Virginia Tea Company
The Virginia Tea Company was borne out of Army veteran and founder Marisa Lightfoot’s vision, passion, and love for tea which became her calling to share the benefits of tea with Americans who are not as avid tea drinkers as the rest of the world, alongside the necessity to ensure the teas and herbs she would use, were all Fair Trade. This veteran-owned business sources USDA organic local herbs for a truly “farm to tea cup” experience, while other tea leaves not available in the US are certified Fair Trade. The Virginia Tea Company is one of only a few, nationally certified Fair Trade companies in the USA, and as stated on its website, the company is the only one based in Virginia. Tea brews and blends are available for purchase online and through a selection of retailers you can find on its website. Photo Credit: The Virginia Tea Company on Pinterest
Alpha Charlie’s Tap & Tavern
Located in Centennial, Colorado, Alpha Charlie’s Tap & Tavern has become a staple watering hole and eatery for the residents and working crews around Centennial, Englewood, and Parker. Opened in July of 2020, this local business owned by Ron House is veteran-owned and veteran-operated offering a great selection of 28 draft beers and assortment of bottled and canned beers. And the food, wow. This is not-your-typical Sports Bar menu offering everything that is All-American while standing out from the competition with burgers on brioche, to-die-for sandwiches, street tacos, as well as the crispiest chicken wings and tenders on the planet (no joke!), as well as salads, soups, delicious entrees, and so much more. The staff and atmosphere create the best easy-going meeting spot in the area, and your game will definitely be showing on one of the 30 flat screen TVS. Whether getting a bite indoors enjoying the comfortable seating or taking a load off outside on the massive patio, you are sure to have a great time at this Colorado local tap & tavern! A HighCom staff favorite! Photo Credit: Alpha Charlie’s Tap & Tavern website
Launch Pad Brewery
US Air Force veterans David Levesque and Henry Rusch opened Launch Pad Brewery in 2015 in Aurora, Colorado after their stationing at Buckley Air Force Base turned them into lifelong friends. It’s “Craft beer is our rocket fuel” mantra truly is representative to the owners and staff’s passion and love for the brew one experiences when visiting this brewery. The beer recipes are some of the most unique flavors around, with blends of blueberries, dragon fruit, Michigan sweet cherries, and even peppermint extract available among brews and ales on its current menu. For people who go the more traditional route for their brews, Launch Pad Brewery offers IPAs, American red ales, brown ales, wheat beers, Irish and Belgian style brews, and stouts, as well as traditional German-style Kölsch beers. Don’t take this short list as the end-all though. Just like any truly remarkable brewery, there is a lengthy choice of brews to flavor and of course, the menu changes often. Photo Credit: Launch Pad Brewery website
FedEx – Founder Frederick Smith served four years in the Marine Corps
Sports Clips – Founder Gordon Logan and his wife. Logan served in the Air Force
Sperry Shoes – Founder Paul A. Sperry joined the Navy Reserve then invented the world’s first boat shoe
RE/MAX – Co-founder Dave Liniger and his wife. Liniger served in the Air Force during the Vietnam War
Walmart – Founders Walton brothers, Sam and Bud, served in the Army and Navy
GoDaddy – Founder Bob Parson served in the Marine Corps during the Vietnam War
Nike – Co-founder Phil Knight enlisted in the Army, serving one year on active duty and seven in the Army Reserve
Universal Health Services – Founder Alan B. Miller joined ROTC while in college and served in the Army afterward
Amway – Co-founder Richard DeVos served in the Army Air Corps during WWII
Enterprise Rent-A-Car Company – Founder Jack Taylor, a decorated Navy pilot, served in WWII
Interested in finding more Veteran-Owned Businesses to Support?
Visit VeteranOwnedBusiness.com for a robust directory on veteran-owned companies or you can try searching on BuyVeteran.com to find veteran-owned businesses to support. Both directories include listings from all around the country.
For more information about HighCom Armor and our products, please contact [email protected] or call 614.500.3065.
Cartersville Police Department Donation Recipient of ODMP & HighCom Armor Law Enforcement Campaign
Cartersville Police Department was chosen as the recipient of over $8,000 in HighCom Armor protective body armor in the ODMP x HighCom Armor LE Campaign. Following the nomination from winning donor Don Moody, a retired law enforcement veteran serving 28 years in the Cleveland, Ohio area and who continues serving his community as the Public Safety Instructor at Bartow County College and Career Academy (BCCCA) in Georgia— teaching the students patrol, CSI, tactical team, and EMS training, the donation “came at the perfect time as we have been working to provide new and updated protective gear to the CPD Tactical Team members [and] enables us to outfit one more team member this year,” said Lieutenant Firth from Cartersville Police Department.
Pictured is Don Moody (second from left), Public Safety Instructor at the Bartow County College and Career Academy (BCCCA), speaking with Cartersville Police Department officers at an Academy Police Appreciation Week Breakfast a few years back. Photo courtesy of The Daily Tribune News.
As a Public Safety Instructor at BCCCA, Don’s program relies heavily on local law enforcement partners, which is why he chose Cartersville Police Department as the donation recipient stating, “They provide endless support for our high school public safety program . . . they are a wonderful bunch of officers, [and] given their size, they’ve encountered some budget challenges this past year.”
Cartersville Police Department received the prize package:
Partnering with The Officer Down Memorial Page (ODMP), the month-long campaign generated 46 donation entries supporting ODMP and its efforts providing free programs, resources, and maintaining tributes for the 24,000+ law enforcement officers who have given their lives in the line of duty in our country’s history.
Thank You Participants
Again, we’d like to thank everyone who donated to the 2020 ODMP x HighCom Armor LE Campaign and ODMP for their partnership with us supporting law enforcement, and a special thanks to winner Don Moody for his continued service to the community, his students, and supporting his local officers.
And a big congratulations to the Cartersville Police Department from all of us at HighCom Armor.
ABOUT ODMP AND HIGHCOM ARMOR
Officer Down Memorial Page (ODMP) is a non-profit organization dedicated to honoring America’s fallen law enforcement officers. More than 24,000 officers have died in the line of duty in the United States since 1776 and ODMP is honored to preserve their memories and give friends, family, other officers, and citizens alike the opportunity to remember the fallen and honor their sacrifices. ODMP also provides a free line of duty death notifications, training resources, and statistical analysis to the law enforcement community through our programs and partnerships.
HighCom Armor is a name recognized within the defense space as a trusted and valuable resource for high-quality and cost-effective protective systems. The company’s engineering and operation teams have designed and commercialized numerous solutions according to NIJ and MIL-SPEC body armor standards and testing protocols. Thousands of customers from the United States Military and Law Enforcement to governments and agencies around the globe have come to depend on HighCom Armor’s advanced ballistic armor manufacturing processes.
Continuing our 24-year mission to save lives and to meet the increasingly lethal threats posed by high-velocity rifle rounds, HighCom Armor and XTEK are proud to introduce three new rifle special threat hard armor plates the Guardian™ series RSTP Gen 2, 3i10m, and NIJ Certified 3i7m ICW sa3920. “I am honored to be part of an incredible team of dedicated professionals to share in this great achievement across our integrated engineering and operations teams globally that have coordinated the effort from original design through commercialization and now production and delivery of these life-saving products,” said Mike Bundy, CEO of HighCom Armor. “These next-generation clandestine rifle armor plates will provide the ultra-lightweight, low visibility, and higher performance at affordable prices desperately needed by law enforcement and first responders throughout the United States, Canada, and Mexico to meet not only the critical mission purpose while affording more departments easier access to these next-generation materials and technology.”
THE CHANGING BALLISTIC THREAT LANDSCAPE
Where handgun threats were once the major threat against law enforcement just 40 years ago, law enforcement, special ops teams, and first responders are now up against the changing landscape of threats from AR-15, SKS, and AK-47 rifles and other semiautomatic rifles. Not only are these rounds capable of piercing stand-alone level II or IIIA soft armor, these bullets pierce walls, telephone poles, and can penetrate cars as well.
OUTGUNNED & OUT ARMED
Law Enforcement is facing unprecedented threats in the field, where they are frequently outgunned by those who are armed with higher velocity armor penetrating bullets. These weapons pose a serious and deadly threat to our first responders, and it is becoming even more critical to wear higher level protective body armor routinely and for longer periods of time. Particularly for those deployed in urban areas where semiautomatic rifles are commonly used.
EXTRA PROTECTION EQUATED TO PAINFUL POUNDS & DISCOMFORT
Unfortunately, protecting a life from these threats usually meant heavy and bulky armor, which was unsuitable for long-term wear. And if the armor is uncomfortable to wear, in less extreme situations while on the job, operators may be hesitant to wear it at all. Long-term wear of heavy armor can cause lower back pain, muscle fatigue, or chafing and blisters. It also can reduce the wearer’s tactical effectiveness or impair their marksmanship when the weight of the armor begins to take its toll on the body. Heavy body armor can also get incredibly uncomfortable for those who must stay sedentary for long periods. Essentially, high-level protective armor is difficult to wear for a few hours, let alone for the entirety of an eight-hour or longer shift.
And then there is the weight. Scientific research has shown, extra weight on the body can have negative effects on our health and wellness. Unnecessary weight is bad for the joints, back, knees, heart, the lungs. Yet, police officers, special forces teams, and soldiers can add up to 40 lbs. of extra weight on their bodies from the armor and gear they must wear in their line of work. This may not always have an immediate negative health impact, but over the years this can become a serious health issue for many of our front-line heroes.
Yet, routine use of appropriate threat level body armor does significantly reduce the likeliness of fatality from a ballistic bullet hit. It must be worn to save lives, and it must be worn regularly.
GUARDIAN™ RIFLE ARMOR PLATES
Getting life-saving protection from rifle hits doesn’t have to mean heavier armor. As a manufacturer for over 20 years, our ballistic body armor systems including plates, soft body armor insert panels, and vests are guided by these important principles: high performance, advanced technology, lightweight, and affordable armor solutions.
Our latest NIJ Standard 0101.06 tested clandestine series Guardian™ rifle armor plates bridge the gap between comfort, wearability, and price and protect against multi-hits of high-powered rifle special threats when worn in-conjunction with NIJ IIIA soft armor. Lighter and thinner, the Guardian™ clandestine series is more comfortable and easier to wear for longer periods and strong enough to provide ballistic protection against most high-velocity rifle rounds, such as those typically fired from AR-15, M4, and AK-47 rifles. For law enforcement and first responders, this means deploying with proper life-saving protection that can be routinely worn while on duty for longer periods of time with enhanced mobility.
NEW! Guardian™ RSTP Gen 2
The new Guardian™ RSTP Gen 2 armor plate provides superior stopping power against SIX, (yes six) rounds of Green Tip and is NIJ 0101.06 tested to level III+ rifle special threat and multi-hit capable when worn in conjunction with Level IIIA soft armor. RSTP Gen 2 thinness measures under an inch at 0.75” and weigh 0.2 lbs. lighter than other RSTP plates across all sizes and cuts.
NEW! Guardian™ 3i10m
Ultra-thin and ultra-lightweight, the new Guardian™ 3i10m is a top tier plate engineered and manufactured to provide level III+ and special threats protection when worn in-conjunction with level IIIa soft armor. Measuring under ½ inch thin at 0.47” and weighing no more than 1.9 lbs. in the M size multi-curve SAPI cut, these plates protect against 7.62mm FMJ M80, mild steel core, and 45mm M193 FMJ bullets when worn with ICW soft armor.
NEW! Guardian™ 3i7m ICW sa3920
NIJ 0101.06 Certified and designed specifically for the patrol officer, the Guardian™ 3i7m ICW sa3920 rifle plate is an excellent everyday wear armor solution that is comfortable and ultra-lightweight and stops level III+ rifle armor threats when worn in-conjunction with (ICW) sa3920 soft armor. Measuring only 0.87” thinness and weighing no more than 2.2 lbs. for the M size multi-curve SAPI cut, this plate stops Steel Jacketed M80, 39mm Mild Steel Core, and M193 rifle rounds when worn ICW soft armor.
HighCom was awarded the Sourcewell Contract #011221-HCM on numerous types of body armor and personal protective equipment and is another contract purchasing vehicle added to several other Federal, State, Local, and Education contracts HighCom holds. HighCom encourages our partners to leverage these contracts for the purpose of ensuring Agencies and Institutions take advantage of the most competitive government direct pricing available through HighCom Armor.
About Sourcewell
It’s not about us. It’s about you!
We exist for one purpose: to help communities.
We are honored every time you call on us to help serve your community.
Sourcewell is a self-sustaining government organization that has over 40 years of dedicated service helping government, education, and nonprofit agencies operate more efficiently through a variety of solutions. Contract purchasing solutions that are competitively solicited nationally, offering over 400 awarded contracts.
Throughout North America, we offer a cooperative purchasing program with over 200 awarded vendors on contract. On behalf of our 50,000 members, Sourcewell conducts competitive solicitations, awarding to the most responsive and responsible vendors at the manufacturer level. Members can purchase off these contracts through their local dealers, streamlining the procurement process. Sourcewell is driven by service and the ability to strategically reinvest in member communities.
Mission
To build valued relationships, deliver innovative solutions with integrity, and exceed the expectations of our members.
Vision
Sourcewell provides member-centered solutions that enable Government, Education, and Nonprofit agencies to work more efficiently and leverages its resources to effectively re-invest in the communities we serve as an invaluable Service Cooperative partner.
Timeline of Sourcewell RFP
In November of 2020, Sourcewell released RFP #011221 for Body Armor with Related Accessories, Equipment, and Services.
In January 2021, HighCom responded to this RFP with the intent to increase it’s supply of high quality USA made body armor and protective equipment through the nation’s most successful Cooperative purchasing program.
In March 2021, HighCom was chosen as one of five successful bidders out of 17 to receive the opportunity to contract with Sourcewell for the supply Body Armor with Related Accessories, Equipment, and Services.
Why HighCom engaged Sourcewell
Sourcewell’s role is to help educate and support vendors and participating entities to provide a connection for the pair to work collaboratively towards the success of connecting quality products with end-users demands.
HighCom would look to integrate the Sourcewell contract similarly as our GSA, DOD Fedmall, and NASPO contract as a contract vehicle for participating entities to use towards a guaranteed lowest price acquisition on quality body armor protective products. HighCom would advertise and provide an online portal to the Sourcewell contract and related entity for agencies to find their registration and/or join Sourcewell for procurement purposes.
HighCom Technology and Sourcewell Order Management Process
STEP 1: HighCom receives an order from the participating entity and begins the internal workflow to enter the sales order and confirm with the customer. Once entered from sales order the internal logistics team creates fulfillment and/or work order depending on if the item is in stock or needs to be manufactured.
STEP 2: Once the work order/fulfillment moves forward, associates in our facilities act to get the items gathered, inspected, and packed for delivery to the customer.
STEP 3: The order is automatically fulfilled and billed to the customer through the workflow of our ERP/MRP systems.
STEP 4: Our sales reporting system enables capturing of sales contract identifications quarterly, annually, or according to the required timeline. Providing completed detailed reports on customer compliance of contract in excel, pdf, or other mediums as required by Sourcewell.
Officer Down Memorial Page (ODMP)
HighCom Armor
